Tool and Die Design

Before commencing a mold project, we will spend much time on discussing part's design with customers. Mostly, customer's drawing derive mainly from the final product's function and apperance, or assembly idea. Unfortunatly, some of them are uninitiated with die casting concept. And that lead to some dimesions or designs are not working at die casting.




When it comes to die cast design, we put emphases on tooling life and simplification. Some say over 70% success tool and die design contribute to good parts in die casting; that proves the importance of die design.








One day our customer resorted to engineering comments for the part. The gate is located in the middle of the part in particular as blue area; and the ejector organization is within certain limit. In our opinion, it is better to utilize the bushing ejector to push the part out of mold as green area shown. In short, ejector organization is a thorny issue.


Though we did not receive the order eventually, we are pleased to assist customers of our own accord in die design. Please contact us whenever we can be of assistance.




http://www.gudiemaker.com/
gutw@gudiemaker.com
gunion@ms13.hinet.net